•
The viewfinder design is similar to that of a rangefinder camera, resulting in a
slight deviation between the viewfinder and camera lens. The actual captured
image may appear slightly lower than what is seen in the viewfinder. Shooting
technique: Align the subject within the viewfinder and slightly lift the bottom of
the camera by about 5 degrees for the best results.
(Fig. 1)
What is the resolution of the camera?
•
The camera has a 1-megapixel wide-angle lens with a DFOV of 70 degrees. It
also comes with an ISP for professional image processing. It delivers good
imaging results when capturing subjects from a distance of half a meter or more.
How to unbind the device?
•
Log in to the PAPERANG app using the PAPERANG account that is bound to
the device. Click on the device name in the upper-left corner, access the three
dots menu, and select "Delete PAPERANG."
How long does it take to fully charge?
•
It takes about 1.5 hours to fully charge.
Unable to connect to the PAPERANG app?
•
Check if Bluetooth is enabled on your phone and if a usable network connection
is established.
•
Verify that the Bluetooth permission is granted on your phone. Some Android
systems require granting location access.
•
Ensure that the camera has su
ffi
cient battery power (press and hold the power
button for 3 seconds to confirm if it can be powered on; if not, charge it first).
•
Check if the printer is bound to other devices; if so, it needs to be unbound first.
Unable to print?
•
Ensure that Bluetooth is enabled on your phone and verify that it is not
connected to other devices.
•
Check if the thermal paper has run out.
•
Check if the thermal print head is overheated (indicated by a flashing white
light). If overheated, wait for the print head to cool down before attempting to
print again.
•
Restart the camera and try reconnecting the Bluetooth.
Why is no content being printed?
•
Confirm that the consumables are installed correctly, with the correct orientation
(that is, the smooth side faces up).
(Fig. 3)
How to restart the device if it freezes?
•
Slide open the compartment cover, remove the consumables, and press the
Reset pinhole once with a paperclip to restart the device.
How to check the battery level?
