Paolo Severin Fokker E.I Eindecker, Assembly Manual

Page: 18 / 32

18
2 , 5 m m H O L E
I N N E R S T E E L F I T T I N G O N S PA R R O O T
W I T H L U G F O R I N T E R N A L B R A C I N G W I R E
O U T E R S T E E L F I T T I N G O N S PA R R O O T
8) Mount the steel fittings on both sides of the spars (photo E) and remove the
wood following the shape of the fittings as in the drawing D.
9) Drill a 2.5 mm hole on the spar as in the drawing D.
10) Mount the wire attachments as in the drawings F and G.
11) Place a lime wood strip on each rib support and glue the trailing edge as shown
in the drawing H. On the first two ribs use a 2 mm ceiba plywood sheet (photo I)
D
Note: chamfer the ends of each strip to an angle of 10° approx. with sandpaper.
H
F R O N T
S PA R
W I N G T I P F U S E L A G E
R E A R
S PA R
W I N G T I P F U S E L A G E
F G