Operating Instructions (Slide-In)
Installing or Removing Battery Pack
1. Always switch off the machine before insertion or removal of the battery pack.
2. To remove the battery pack, push the button on the battery pack and pull the
tool unit from the battery pack in the direction.
3. To insert the battery pack, align the tool unit slides with the battery pack sliding
groove and push the tool unit into place.
The tool unit can be slide into battery pack in two directions.
4. Do not force the battery pack in sliding it into tool unit. If the battery pack does
not slide in easily, it is not being inserted correctly.
Charging the Battery Pack
1. Connect the plug to the charger before charging.
2. Plug the fast charger into the power source.
3. Slide the battery pack into the charger as the arrow direction shown on the
charger.
4. Push the battery pack into place and make sure the red light on the charger is
“ON”. The battery pack is now starting the charging cycle.
5. After finishing the charging cycle, the light will turn into green. The battery pack
is now ready for use.
6. Your new battery pack is not charged. You need to charge it before use.
7. If you try to charge a battery pack from a just-operated machine, sometimes
the charging light will not come on. If this occurs, let the battery pack cool for a
while then re-insert it and try to charge again.
8. When you charge a new battery pack or a battery pack which has not been
used for a long period, it may not accept a full charge. This is a normal
condition and does not indicate a problem. You can recharge the battery pack
fully after discharging it completely a couple of times.
9. Unplug the charger from the power source after finishing the charge.
10. Please remove the battery from the unplugged charger for storage.
8