panthera U3 Light Y-Front Operating Instructions Manual Download Page 3

Page: 3 / 24

art.nr

.bruk-U3-Light-eng, Rev

. 2018-02

Panthera

AB reserves the right to make technical changes if required

CONTACT

If you have any questions or need help with the product, contact your local supplier (Assis-

tance centre) first. To get in touch with the manufacturer, see the details below:

Panthera AB +46 (0)8-761 50 40

Gunnebogatan 26

www.panthera.se

SE-163 53 Spånga

[email protected]

DESCRIPTION

(Fig. 1 and 2)

Panthera U3 light

is a dyn

amic wheelchair designed to let you live life as actively as pos-

sible. Meticulous attention has been paid to every detail.

The low weight, combined with the stable, fixed frame and easy rolling castors, make the

wheelchair extremely easy to manoeuvre.

The chassis’ seat angle, along with adjustable backrest and seat upholstery and backrest

angle adjustment, combine to provide extremely good seating comfort

The fabric used in the backrest upholstery has been carefully selected to provide

ergonomic and comfortable seating posture

The wheelchair’s balance point can be adjusted to enable you to find a setting that makes

you feel safe and secure.

Panthera U3 Light Y-front

Fig. 2 och 3

, gives full frame width for the user’s thighs and

then narrows down the frame front to the fixed footplate, where the feet rest together.

Also available as

Panthera U3 Light /L Y-front

and

Panthera U3 Light Y-front 90°

, has a

right angle, between the frame front and the seat. Otherwise they have the same specifi

cations as

U3 LIGHT.

Panthera U3 light,

Fig. 1, 2 and 3

U3 Light is a wheelchair designed for the active, advanced user. U3 Light has a ”tippy” ba-

lance, easy to lift and transport and also extremely easy to manouver. In standard configu

ration U3 Light has a rigid rear axle of carbon fibre, lightweight rear wheel, aluminium foot

rest, easy rolling castor wheels, arm brake, and a seatbag. The foldable back rest has no

locking mechanism. Available in two versions, U3 Light and U3 Light/L, U3 Light has a nor-

mal balance and U3 Light/L a more ”tippy” balance. On ”U3 Light/L” the rear axle is moved

forward an additional 22 mm. Fine adjustment of the balance is acomplished by adjusting

the back rest forward or ba-10mm.

Fig. 1

Fig. 2

Fig. 3

Summary of Contents for U3 Light Y-Front

























Search results

Summary of Contents for U3 Light Y-Front

Reviews:

Related manuals for U3 Light Y-Front

Brands by name

Popular brands

panthera U3 Light Y-Front, Operating Instructions Manual

Search results

Summary of Contents for U3 Light Y-Front

Reviews:

Related manuals for U3 Light Y-Front

Brands by name

Popular brands