18
art.nr
.8822165, Rev
. 2022-04 Publ. 2022-04-1
1
Panthera
AB reserves the right to make technical changes if required
MAINTENANCE
To change castor
1) Order parts in the right dimensions.
2) Disassemble the castor with allen key 4 mm.
3) When mounting the new castor you hold both bushings with your thumb and
index finger and slide the castor into the slots on the fork.
-
When reassembling castors after cleaning or servicing, always check that the
bolt still has thread lock (blue, red or green) on the thread, which indicates suffi
-
cient thread lock. If thread locking is missing, a new bolt must be ordered or light
thread lock must be applied
4) Tighten with allen key 4 mm. Check that wheel rotates easily.
Fig. 28
Fig. 27
