Panther S-TYPE DOLLY, User Manual

Page: 20 / 64

20
How to program:
If you want to program your dolly you have make sure
that you are in „PROGRAM-Mode“.
Start to drive the S-Type Scissors-Arm manually to
you desired starting position by using the handsets‘
rocker.
If the Scissors-Arm is at this position you have to
press the STF button (
STore First Flag). Now the
starting point is stored.
Now you can drive your Scissors-Arm manually to the
next desired point by using the handsets‘ rocker.
You can repeat this process as often as you need it (up to 255 points can be programmed). With
RET button you will get back to the „Recallmode“ where you can start moving what you have
programmed.
WIRELESS HANDSET
PROGRAM MOVEMENTS
You may drive up or down to any stopping point until it is entered. Enter the point by pressing
the STM button (
STore Movement).
Stopping point will only be recorded when the Scissors-Arm is completely
stationary. To be quite sure of correct entry of any point, always wait a
moment before pressing STM button.
The Panther electronics will memorize only
the highest speed used to reach this point
manually, and will repeat the move at this
speed throughout. If you wish to program
a slower movement, you must drive slowly
to the stopping point.
!