6
Lock rail in horizontal position and place
sliding camera mount in the center of rail.
Lock sliding camera mount with brake lever
(red).
Mount Fluid Head with knob which is sup-
plied with Multiglider. Do not use originals
knob of Fluid Head. It might be to big, es-
pecially using 100mm bowl.
Lock camera mount (bowl) with its two tilt
brakes.
Place camera with all accessories
onto Fluid Head.
Add or remove counterweights on
counter weight sledge if necessary.
The weights are available in different
sizes (width) for best balance. Secure
with supplied nuts.
Both units are perfectly adjusted (bal-
anced) if loaded sledge is not moving
(brake open) when rail is in vertical or
diagonal position.
Diagonal Shootings:
Place rail in requested diagonal position (angle) and lock Rail with its Tilt-Brake.
Open both Tilt-brake levers of camera mount (bowl) and level. Secure safely
after levelling.