21
Figure 8 – Mounting Bracket Installation
3.
Place the radio into the mounting bracket and secure with the four 3/8”
Phillip’s screws supplied. The radio can be fastened in any of three
different positions: parallel to the mounting surface or tilted slightly
from the parallel position. (Refer to Figure 9.)
4.
Connect antenna coaxial cable to antenna connector (TNC).
5.
Insert power cable into power connector running from rear of radio unit
and push until the connectors snap together.
6.
Recheck all connections and then reinsert fuse into the fuse assembly
on the power cable.
