Panther 1650, Instructions/Spare Parts Manual

Page: 21 / 103

INSTALATION
2.1 Lifting the machine
While lifting the machine by crane, proper care should be taken to
prevent damage of machine paints, components and levers. Use suitable
wooden block or felt packing, when ever chances of damage to machine
part due to contact of Rope or chain are possible. Suitable capacity
ropes/chains should be used, while lifting the machine and It should be
lift in balance position. For proper balancing of the machine, move tail
stock and carriage at appropriate position and clamp on bed.
2.2 Unpacking and cleaning.
Once machine is brought in shop Floor, for unpacking of the
machine, proper care should be taken. In ease of machine with ease
packing, Top direction is marked on wooden case. It is suggested that the
packing case is opened soon after its receipt and verification is made for
the standard and extra accessories mention in packing slip.
Prior to dispatch, all Slides all unpainted parts, handles etc are
coated with anti corrosive / rust – preventive. This should be carefully
removed and wiped dry and then all bright machine parts should be oiled
Immediately.
2.3 Foundation
The lathe machine can give satisfactory performance only, if it is
put on proper foundation and proper leveling is done. Foundation should
be prepared as per foundation drawing and sufficient time should be
allowed for concrete slab to be fully cured and dried. The depth of the
foundation slab given in foundation drawing is only recommended and it
should be directly decided by the users, depending upon the soil condition
and surrounding atmosphere. The load bearing capacity of the soil should
be taken in account for preparing foundation.
P
ANTHER
MODEL PAGE NO.
1350 / 1650 17 A