D. Transportation and Storage
Please handle the contact grill carefully during transportation and do not turn it upside
down to prevent any damage to the unit. The packed contact grill should be stored with
adequate ventilation and non-corrosive gas. Any weatherproof measures should be applied
when in temporary storage.
E. Notes
1.
The working voltage of the equipment should match that of the power supply.
2.
Suitable switch, fuse breaker and three-phase socket should be installed near the
equipment.
3.
There is an earth bolt at the back of the equipment. Please connect the earth wire in
compliance with the safety regulations reliably with copper cable of no less than 2mm.
4.
Before using user should check whether connection is firm and voltage is regular and
earth connection is safe.
5.
Do not put any object on top of the upper module plate and do not open the lift operation
handle with sudden force.
6.
Cut off power supply while cleaning. Do not use a wet towel with corrosive cleanser and
do not directly splash water on the equipment.
7.
The adjustable temperature of the equipment is between 50~200
º
C. It is recommended
that the maximum working temperature normally should be 150~190
º
C.
8.
Do not store any flammable objects near the equipment. The environment temperature
should be lower than 45
º
C, the humidity should be under 85%.
9.
The installation and maintenance of the equipment should be carried out by professional
technicians.
Special Notes
WARNING!
●
This product is a commercial machine and must be operated by trained
cook.
●
Do not dismantle and refit the machine.
Any dismantling or alteration could cause serious accidents.
Do not lift the upper module plate with sudden force or if the machine is
at an angle.
●
Before cleaning, unplug the machine and cut off power supply.
Do not spray water directly at the product.
Water can conduct electricity and can cause accidents.
●
Do not put heavy objects on to the product.
Incorrect operation can cause the equipment to become damaged and
dangerous.
●
High temperature can cause burns.
Take care when the equipment is in use and before or after using it -
Do not touch the exterior and module plate because they can become
