Pantera Command Centre, User Manual

Page: 32 / 58

32
14 TOUCH PANEL CALIBRATION
From Program Page enter Settings.
Click the icon to log onto Touch Panel Calibration.
•
Using a touch pen press the very centre of the cross as shown on the
screen until the Calibration Cursor moves to the upper left corner
automatically and then the lower left corner, lower right corner and
upper right corner in sequence.
•
If the calibration is achieved, the screen displays OK and the user can
use a Touch Pen to click any spot on the screen to quit. Calibration
information is then memorized even the power is off. Your screen was
calibrated prior to release from the factory.