Pantech Hotshot, User Manual, Page: 39 / 73

74 75
02
03
01
04
05
06
07
08
PHONE SETTINGS
Allows you to customize the phone settings of your phone.
VOICE COMMANDS SETTINGS
Allows you to set options for Voice Commands.
CONFIRM CHOICES
When the phone does not recognize your voice command, it will ask you to repeat
your voice command. If it does not recognize the name or number, it will display a
list of up to three choices and speak each one in turn. You can control how often the
phone asks you to confirm the recognized name or number.
1. Unlock the screen, tap Settings and then tap Phone Settings .
2. Tap Voice Commands Settings and then tap Confirm Choices .
To view information about each option, tap Info .
3. Tap a confirmation choice in the Change to field to select.
SENSITIVITY
The Sensitivity setting allows you to adjust the sensitivity monitoring of voice tones.
If you frequently experience the messages “
Please try again ” or “ COMMAND
NOT RECOGNIZED Try again? ”, adjust the sensitivity toward Less Sensitive . If you
frequently experience false activations (when the phone recognizes a name you
didn’t say), adjust the sensitivity toward
More Sensitive .
1. Unlock the screen, tap Settings and then tap Phone Settings .
2. Tap Voice Commands Settings and then tap Sensitivity .
3. Tap Automatic , More Sensitive , or Less Sensitive in the Change to field
to select.
ADAPT VOICE
Voice Commands are speaker independent, which means that no training
or adaptation is required. Some users with heavy accents or unusual voice
characteristics may find difficulty in achieving high accuracy with speaker
independent Voice Commands, so the Adapt Voice feature allows users to
dramatically improve the recognition accuracy after adapting their voices.
Users who get acceptable recognition accuracy will find no additional benefit to
performing the Adapt Voice feature.
1. Unlock the screen, tap Settings and then tap Phone Settings .
2. Tap Voice Commands Settings and then tap Adapt Voice .
3. Tap Train Voice .
• Train Voice : Requires that you make recordings of your voice to customize the voice
recognition system. It will take a few minutes.
• Reset Voice : Once you finish the adaptation process, you can reset the adaptation to
the factory default. The Reset Voice option only appears after you finish the Train Voice
process.
4. Tap OK to begin.
5. Wait for the beep, and then repeat the sentences using a normal tone of
voice.
6. When you are finished with a full session, you will reach a screen that reads
“ Adaptation complete .”
PROMPTS
Allows you to select voice command system characteristics.
1. Unlock the screen, tap Settings and then tap Phone Settings .
2. Tap Voice Commands Settings and then tap Prompts .
3. Tap one of the following options and then tap the desired submenu option
in the Change to field to select:
• Mode : Tap the voice command system mode from the following:
- Prompts : For handset to prompt for required information.
- Tones Only : For handset to provide beeps only for audio guidance.
• Audio Playback : Allows audio playback to play through the speakerphone or earpiece.
Tap Speakerphone or Earpiece .
• Timeout : Tap a period of time either 5 seconds or 10 seconds which the system listens
for a command before timing out.