Pansat 250SM, User Manual

Page: 19 / 33

ⓒ
2007 by Panarex Electronics
19
• Universal 2 (9750MHz & 10750 MHz)
• Single-SL (5150MHz & 5750 MHz)
• Single-SH (5150MHz & 5750 MHz)
• Standard for USA (10750 or 11250)
• Single Stack (10750(V) / 10175(H))
2.1.4 LNB Lo-Freq
If the required LNB frequency is not available, select “Standard” and then input the frequency manually using the
numeric keys.
2.1.5 22Khz
In case you are using a Dual LNB or two antennas connected to a 22KHz tone switch box, make 22KHz tone switch
“ON” or “OFF” to select an LNB or an antenna.
2.1.6 DiSEqC
• DiSEqC 1.0, 1.2, 1.3 (STAB USALS) is compatible
• DiSEqC 2X1 & 4X1 is usually available.
2.1.7 Positioner Setting
It is used to set the DiSEqC 1.2 motor & USALS
If you have no positioner equipment, select “Disable”
1) DiSEqC 1.2
(1) Current position
Select the position number by using keys
◀ ▶
(#0~#26:default define, #27~#49: user define)
(2) Movement
Select East / West by using keys ◀ ▶ .
(3) East Limit Set
Move the position to the most desired eastern position and press OK then East Limit is stored.
(4) West Limit Set
Move the position to the most desired western position and press OK then West Limit is stored.
(5) Limits Disable
Select Disable limits by using OK key
(6) Go to reference
Select go to reference by using OK key
This selection also enables “resynchronize” programmed positions when shifted after certain period operation.