8
© 2006 PANORAMAdtv ALL rights reserved
RM-2440
User Manual P/N
821574
Rev-
C
1
2
3
4
Please refer to
Figure-2a
on the following page to familiarize yourself with the front panel features of the
RM-2440
unit. The
following sections describe these features and are referenced, by number, to
Figure-2a
.
Section 2: Operation
Front Panel Features
LCD Video Display (1-4
)
View input video sources here. Select one of two source inputs for each display by setting the
A/B Source Select Switch
(
Item 4
) to the desired input. Screen image parameters are adjustable by four manual controls (
Item 2
).
LCD Video Display Controls (1-4)
Each LCD video display can be adjusted separately using these four image controls:
• BRT
-
Brightness
; adjust for desired screen brightness.
• CNT
-
Contrast
; adjust for desired image scene, dark-to-bright contrast.
• COL
-
Color Saturation
; adjust for desired amount of image color saturation.
• TNT
-
Tint (Hue)
; adjust for desired image color hue (NTSC only).
Tally Indication LED (1-4)
This tri-color LED can glow RED, GREEN, or YELLOW to indicate tally status associated with the signal displayed. Refer
to pages
14
and
15
for tally connection details.
An optional audio indication module (
AIM-1
) may be installed into the
Tally Control Connector
on the rear panel (
Item
E
, page
10
), which allows these LEDs to act as audio indicator lights. Please contact
PANORAMAdtv
for more information
about this optional feature.
A/B Source Select Switch (1-4)
In a standard configuration, this switch selects between the primary
CVBS
(
A
) and secondary
CVBS
(
B
) video source
inputs for the associated
I/O Section
.
If an optional input module (
RMSDI-1
or
RMSDI-2
) is installed in an
I/O Section
, the associated switch selects between
the primary
CVBS Input
(
A
) source and the
installed
optional input video source (
B
).
