Panorama Antennas SW3-665 WMMG, Installation Manual

Page: 3 / 28

EN
A. SELECTING A POSITION
A.1
A.1 - check that all the contents are in the box - This should include:
1 x Antenna 1 x U-Bolt Plate 4 x Spring Washers
2 x Wall Bracket Plates 4 x Screws 2 x Nuts
1 x U-Bolt 4 x Plain Washers
A.2 - Select position
For a good installation the antenna should
be directed towards the strongest network
signal. In order to achieve this follow the
guide below.
1. Connect the antenna to your data card
or modem with the antenna adapter (if
applicable) and coaxial cable provided.
2. Ensure that your device is connected
to the network and displaying the signal
strength indicator.
3. With the antenna at selected location, rotate it in approximately 45 degree steps – in
each position, you may need to wait for up to one minute to allow the signal strength
indicator to update.
Note: Signal strength indication may be displayed either:
a. Graphically with bars, (where more bars is a better signal), or
b. As a signal level value in dBm (e.g. -80) - in this case, the lower the negative number,
the better the signal, (i.e. -71 is stronger signal than -83).
A.2