Panorama Antennas MiMo, Installation Instructions Manual

Page: 5 / 12

5
1.3. Mounting the Antenna
Mounting the antenna internally
To mount the antenna internally use the supplied desk stand and follow the instructions at 5. DESK
MOUNTING INSTRUCTIONS
Mounting the antenna externally
Mounting the antenna outside will provide optimum signal strength and data rates. Begin by following the
instructions at 1.2 concerning position and orientating the antenna. Then follow 3. MAST MOUNTING
INSTRUCTIONS or 4. WALL MOUNTING INSTRUCTIONS depending upon the equipment you have
available.
2. Important Information
RF Safety Note - Ensure that the antenna is mounted in such a way that no person is likely to be within
a distance of 30cms (12”) from the antenna during use.
RF Safety Note - Ensure that the antenna is used only as supplied the co-axial cables should not be cut
shorter or otherwise modified.
Waste electrical products should not be disposed of with household waste. All electronic products with
the WEEE logo must be collected and sent to approved operators for safe disposal or recycling. Please
recycle where facilities exist. Many electrical/electronic equipment retailers facilitate “Distributor Take-
Back scheme”for household WEEE. Check with your Local Authority or electronic retailers for
designated collection facilities where WEEE can be disposed of for free.
CE Note RoHS 2 compliance is declared per Directive 2011/65/EU and its subsequent amendments
with exemption 6.c applied. This product contains lead as an alloying element in a copper alloy
containing up to 4% lead by weight.
REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals, EC 1907/2006). This
product contains Lead (CAS No. 7439-92-1) which is classified as an SVHC (Substance of Very High
Concern) as being toxic to reproductionunder Article 57c. of REACH.
Electrical Caution - Parts of this antenna are an electrical conductor. Contact with power lines can
result in death or serious injury. The antenna and supporting mast must not be close to any power lines
during installation, use or removal. If the antenna is elevated and at risk from lightning strike it must be
ensured that the antenna is mounted and earthed appropriately by a trained professional in accordance
with the relevant standards.