7
Output page:
The outputs can also be assigned meaningful names, if desired.
The Output page provides information about the signal status of the outputs.
You can do the following operations on the Output page:
① Outputs: Output channel of the device.
② Name: The current output channel’s name. You can modify it by entering the corresponding
name (max length: 12 characters) in the input box (Chinese name is unsupported).
③ Type: The current output channel’s type (HDMI or HDBT).
④ Cable: It indicates the connection status of output ports. When the output port is connected
to the display, it shows green, otherwise, it shows gray.
⑤ Scaler Mode: Set the current output resolution mode.
Bypass:
Follow the input source. (Pass-through)
4K→1080P:
Downscale to 1080p, if needed.
AUTO:
Scaler to match the display requirements.
⑥ Stream: Turn on/off the output stream.
CEC page:
You can perform CEC management on this page: