7
System page:
The system page allows setting of the panel lock and beep on/off, control RS-232 port baud rate.
This page is also used to install new firmware update, restore the factory default settings and reboot
the Switcher.
COM Control Commands
RS232 cable with straight-through connection(USB-RS232 can be used directly to control)
Communication protocol:
Baud rate: 115200
Data bit: 8
Stop bit: 1
Check bit: None
Command
Explanation
Feedback
Power
s power z!
power on/off the device,z=0~1
(z=0 power off, z=1 power on)
power on
System Initializing...
Initialization Finished!
power off
r power!
get current power state
power on /power off
s reboot!
reboot the device
Reboot…
System Initializing...
Initialization Finished!
SYSTEM Setup
r status!
Get device current status
Get the unit all status:
power, beep, lock, in/out
connection, video/audio
crosspoint, edid,
scaler,hdcp, network status