Pani BP12, Instruction Manual, Page: 12 / 17

High Performance HMI-Projector BP 12 Platin-II PANI
Projection and Lighting Vertriebs GmbH
11
9) Condenser System
Type: Order Code:
(1) Cold Light Mirror Ø 155mm 222-03-04 24-0043
(2) HMI- Lamp 12000 W/ GS H 1701 37205
(3) Fresnel Lens Ø 300 mm 85 40 51 24-0033
(4) Heat Absorption Filter 300x 300x 3 mm KG 1 24-0035
(5) Middle Lens PC Ø 320 mm R 3545/ G 24-0034
(6) Front Condenser Lens 11 - 27 cm, PC Ø 320 mm G 706/ G 24-0057
Front Condenser Lens 33 - 60 cm, PC Ø 320 mm G 705/ G 24-0058
Front Condenser Lens 80 - 125 cm, PC Ø 320 mm G 707/ G 24-0034
The lamp/mirror slide may be deadjusted from the
standard – position for some objectives to get better
light output and light homogenity. Therefore ulosen
the two screws on the guiding tubes of the
lamp/mirror slide (see figure aside) and move the
slide into a position which is corresponding to the
table below.
Value X is measured between the slide plate and the
lens plate of the fresnel lens (see figure aside).
After moving the slide into the desired position, do not
forget to fasten the fixing screw.
NOTE: The deadjusted position may cause bad
results with the other objective lenses.
Objectives X
18 – 40 cm
(
Standard setting
)
193
50 cm 181
60 – 125 cm 175