PANHANS 680|200, Operating Manual

Page: 53 / 78

BA_PH_680-200_EN_11-22.docx
53
17.2 Tilting the Saw Blade (Angular Adjustment)
Important: Before tilting the saw blade, fit the wide saw blade guard!
Figure 56: Adjust angle
1. Press symbol “ Angle ” (see

Figure 54)
2. Enter the desired angle in ° (see

Figure 56).
3. Confirm with .
4. Start the process with the positioning button ( 2 ).
Manual Inching
5. To activate the inching mode, select or .
The selected symbol is then highlighted in red resp. .
6. Press the positioning button ( 2 ) for 0.1° per step.
7. To exit the manual inching mode, press the active (red) icon. The button turns grey again.
To avoid a collision of the saw blade during the tilting process, the rip fence must be at
a position of at least 165 mm during the tilting process!
17.2.1 Angle Compensation Tool for Mitre Cuts
This tool automatically calculates the dimension to be set at the cross-cut fence for angle cuts. To activate the
tool, please select the button .
Figure 57: Angle compensation tool
Procedure: To calculate the position for the cross-cut
fence, simply enter the length to be cut, the desired
angle and the workpiece thickness in the correspond-
ing fields and confirm each with .
The dimension to be set for the cross-cut fence
appears in mm in the "Rip Fence Setting" field.
Then press the button to return to the angle
window (see

Figure 56)
→
The entered target angle has already been adopted.