BA_PH_335-20_EN_07-22.docx
11
3.7
Standard Equipment
•
Powerful three-phase motor 5.5 kW (7.5 HP)
•
Planer guard TXF 1570 with fold-down cover
•
Electromotive adjustment of the infeed table via push-button operation
•
Finely planed machine tables (total table length 2850 mm)
•
All-steel cutter block with TERSA knives
•
Pushbutton for starting the cutter block
•
Anodized fence ruler
•
Digital indicator for chip removal
•
Additional swivelling auxiliary fence
•
Angle console for mounting a feed unit
•
Serrated table lips for noise reduction
•
Automatic star-delta starting and motor protection switch
•
1 grease gun (hollow mouthpiece)
•
2 suction nozzles 160 mm Ø
•
1 Si-Tec push block for safe dressing of short workpieces
•
Hand push handle for self-made push blocks
•
Brass wedge for Tersa cutter change
•
CE conform and GS tested
3.8
Available Options
•
PANHANS 4-knives traditional cutter block with brass adjusters as well as necessary tools
(see section
•
All-steel spiral cutter block consisting of 6 spiral-shaped blade rows with improved cutting quality
due to "pulling" cut, incl. 10 spare knifes, mounting material and tools (see section
•
Planing guard SUVAMATIC (see section
•
Planing guard TX MATIC (see section
Further accessories, options and spare parts can be found in chapter
