www.panel.it 25
25
5.3 Motherboard jumper Setting
The system is delivered with the optimized defaults preconfigured state and is operational.
Changes in the jumpers settings may only be implemented by appropriately trained staff.
The illustration shows how jumpers are setup. When the jumper cap is placed on pins,
the jumper is “Short”. If no j
umper
cap is placed on pins,
the jumper is “Open”. The illustration shows a
3-pin jumper whose pin1 and pin2 are
“Short” w
hen
jumper cap is placed on these 2 pins.
JP15: CMOS Clear Header
Default PSR1 factory setting: 1-2
