www.panel.it 17
17
SO-DIMM slot supports one 204-pin DDR3 (Double Data Rate 3) single channel DDR3L SDRAM only.
Step.1)
Align a SO-DIMM on the slot such that the notch on the SO-DIMM matches the break on the slot.
The SO-DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the SO-
DIMM if you force the SO-DIMM into the slot at incorrect orientation.
Step.2)
Firmly insert the SO-DIMM into the slot until the retaining clips at both ends fully snap back in place and the SO-DIMM is
properly seated.
4.3 HDD-SSD installation
Unscrew the three screws marked above
then unplug the two SATA cables.
On the rear of the drive bay there are
further four screws that lock the SSD unit.
SATA SSD installation area
