For Technical Support:
http://www.panduit.com/wcs/Satellite?pagename=PG_Wrapper&friendlyurl=/en/support/con
tact-us
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
V00028RH
Page 6 of 8
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
Reversible Door
The enclosure comes with the door opening to the left.
The door may be reversed to open to the right.
Step 1:
Remove screws and washers from door hinges.
Step 2:
Turn door 180 degrees and mount to opposite side of enclosure using same screws and washers.
**New Hole locations will have to be drilled or punched out.**
Step 1
Detail View-2 Places
Step 2
Detail View-2 Places
Torque 33 in-lbs.
Removable Gland Plate
The Gland Plate, located on the bottom of the enclosure, is removable for machining to accept bulkhead connectors or compression fit-
tings.
To remove gland plate, unfasten the (10) nuts and (10) flat washers attached to the threaded studs of the gland plate and remove plate
from the enclosure.
When reinstalling the gland plate, ensure the nuts are tightened until the gland plate flanges make contact with the enclosure surface.
Gland Plate
Remove nuts and washers
