TDP43MY Quick Guide
TDP43MY Quick Guide: PA26235A01_01
Page: 4 of 4
3-2010
PLEASE NOTE:
Use component labels with an odd number of columns with the TDP43MY. The TDP43MY has
a fixed sensor and it needs to be able to “see” an actual label or a notch/line to tell the printer when a label
begins and ends. For example, vinyl self-laminating labels have notches in the liner.
Tip: When feeding l
abels through the opening in the back of the printer, be sure to place the 1” core that
came with your printer between the two green guides inside the TDP4MY. After inserting the core and
running the labels through the back BE SURE TO RUN THE LABELS UNDER THE CORE IN ORDER FOR
THE SENSOR TO READ THE LABEL.
For additional assistance, contact Technical Support at 866-871-4571.
