PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
32
Section 2 – PViQ™ Connectivity System Web
User Interface (Web UI)
Internet Protocol (IP) Address
The PViQ™ Connectivity System, by default, is configured to obtain an IP address from
a Dynamic Host Configuration Protocol (DHCP) server when connected to a network.
To obtain the IP address, run the
pviqutil.exe
tool (refer to Appendix B: Finding the
PViQ™ Connectivity System IP Address, for downloading and using this tool). After
obtaining the IP address, login to the Web UI to configure the PViQ™ Connectivity
System and assign a static IP address (if desired). If there is no DHCP server,
download and use an open source DHCP server on your PC (refer to Appendix H:
Changing Your PC to Be a Standalone DHCP Server).
Web Configuration
Supported Web Browsers
The supported Web browsers are: Mozilla Firefox, Microsoft Edge, Google Chrome, and
Apple Safari for desktops; Google Chrome and Apple Safari for mobile devices.
Logging in to the Web Interface
Open a supported web browser and enter the IP address of the
PViQ™ Connectivity
System
.
If the default username and password were NOT changed in a prior login to the
PViQ™ Connectivity System, use the default username:
admin
and password:
panduit
.
For security purposes, change the password upon login.
PViQ™ Connectivity Web UI Pages
There is a total of eight different pages in the PViQ™ Connectivity Web UI.
1.
Login
– is the login page to the PViQ™ Connectivity Web UI.
2.
Dashboard
– provides real time monitoring of every port in the PViQ™
Connectivity System.
3.
Patching
– allows you to configure every port in the PViQ™ Connectivity
System.
4.
Alarms
– lists alarms by panels and ports in the PViQ™ Connectivity System.
5.
Logs
– provides a log of all alarms that are sent by the PViQ™ Connectivity
System.