Panduit SmartZone E24 User Manual Download Page 27 | Manualshive

Page: 27 / 56

Panduit SmartZone E24 User Manual Download Page 27

SmartZone Gateway E24 User Manual

-

27

-

Both

Both LDAP Servers specified will be queried (with priority given to the Primary) to verify
user login credentials' access and privileges.

Credential Cache

This configuration option specifies how long (in minutes) users successfully authen-
ticated via LDAP will be allowed to access the unit without re-authenticating against
LDAP.

Display Name

You can create a display name for the specified LDAP server here. The Display Name is
for reference and logging purposes and has no direct effect on LDAP functionality.

IP Address

Specify the IP address of the LDAP server here.

Unit Base DN

You must provide the Distinguished Name (DN) of the directory object containing the
SmartZone Gateway LDAP authentication structure here. This field is required for LDAP
function.
See

for configuration details.

Users Base DN 1

Provide the Distinguished Name (DN) of the directory object containing directory users
for authentication here. This field is required for LDAP function.

See

for configuration details.

Users Base DN 2

You can specify the Distinguished Name (DN) of the directory object containing directory
users for authentication here. This field is optional for LDAP function providing Users
Base DN 1 has been specified.

«
...
25
26
27
28
29
...
»

Summary of Contents for SmartZone E24

























































Reviews:

No comments