Panduit SDLOCK Series, Installation Instructions, Page: 2 / 2

© Panduit Corp. 2018
INSTALLATION INSTRUCTIONS
V00029PV
Page 2 of 2
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
www.panduit.com
N-Type Single Hinge Door; N-Type & S-Type Solid Rear Door
Lock Swing Handle Replacement
• Remove Cam Screw (use 10mm socket wrench) and Cam Stop (note orientation of Cam Stop) from existing handle
• Remove Door Handle Backing Plate and remove existing door handle (use 10mm socket wrench)
• Install Swing Handle by securing Door Handle Backing Plate to Swing Handle with (use 10mm socket wrench)
• Install Cam Stop and Cam Screw (use 10mm socket wrench)
• Note orientation of Cam Stop
• Ensure that square cutout of Door Rod Assembly sits securely on Swing Handle
• Ensure that door rods are behind door rod guides
Note: Door Rod Assembly does not have to be disassembled. Can be manuvered out of way to install lock.
N-Type and S-Type Split Door
Combination Lock Swing Handle Replacement
• Remove Cam Screw (use 10mm socket wrench) and Cam Stop (note orientation of Cam Stop) from existing handle
• Remove Door Handle Backing Plate and remove existing door handle (use 10mm socket wrench)
• Install Swing Handle by securing Door Handle Backing Plate to Swing Handle (use 10mm socket wrench)
• Install Cam Stop and Cam Screw (use 10mm socket wrench)
• Note orientation of Cam Stop
• Ensure that square cutout of Door Rod Assembly sits securely on Lock Swing Handle
Note: Door Rod Assembly does not have to be disassembled. Can be manuvered out of way to install lock.
Cam Screw
Cam
Stop
Door Handle
Backing Plate
Door Rod
Assembly
(see note)
Swing
Handle
Swing
Handle
Cam Screw
Cam
Stop
Door Handle
Backing Plate
Door Rod
Assembly
(see note)
Door Rods must fit
behind Door Rod Guides