PAT 4.0 AUTOMATIC CABLE TIE INSTALLATION SYSTEM
ELECTRONIC INTERFACE USER MANUAL
© Panduit Corp. 2017
PA28091A01_02
Page
1
of
9
2-2017
1: INTRODUCTION
The PAT Fully Automatic Cable Tie Installation System was designed by Panduit Corporation to install
Panduit continuously molded cable ties for high volume wire harnessing applications.
NOTE: In the interest of higher quality and value, Panduit products are
continually being improved and updated.
Consequently, pictures may vary from the enclosed product.
2: SYSTEM SPECIFICATIONS
The Panduit Corporation PAT Cable Tie Installation System consists of four compatible units: the PAT
Installation Tool, the PDM Dispenser, the PHM Feeder Hose, and Panduit Pan-Ty XMR Cable Ties.
Cable ties are available in reels of 5000 pcs.
NOTE:
Any substitution may cause serious damage to the system and/or injury to the operator.
SYMBOL
EXPLANATION
Warning: Hazardous Voltage
Disconnect power before servicing
Warning: Head Obstruction
Warning: Sever Hand
Warning: Wear Safety Glasses
Caution: Air Inlet
WEEE Compliance
Read the Manual
VAC
FUSE
