INSTRUCTIONS CM469D
For Technical Support: www.panduit.com/resources/install_maintain.asp
7. Each enclosure can accommodate both field terminated or pre-terminated connectivity. If using field terminated connectivity leave TIA/
EIA 19” mounting brackets as factory installed or remove center mounting bracket (See Figure 7.1 and 7.2). If using pre-terminated connec-
tivity (example: cassettes, enclosures) remove TIA/EIA 19” mounting brackets and relocate to the center of the enclosure (See Figure 7.3).
Installation continued:
Figure 7.2
Figure 7.3
Parts List:
(A)
- Fabric
& (B)
- Hook and loop cinch tie
Cool Boot Application
A
B
Note:
Install all cabling in accordance with NEC article 300.22 and Article 800.
Page 4 of 5
a.)
b.)
Cinch material in center to separate wire bundles.
Figure 7.1
