INSTALLATION INSTRUCTIONS
© Panduit Corp. 2016
V00029CX
E-mail:
Phone:
866-405-6654
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 3 of 3
Rev. 02
M10 Hex Head Screw
(use 15mm socket wrench)
Equipment Rail
Mount Nut
(Finger Grip Area)
Barbed Surface
(face to outside
of cabinet)
Rear Equipment Rail Installation
•
Locate desired Equipment Rail position
•
Insert [2] Equipment Rail Mount Nuts through slots of Front-to-Back Beam (top and bottom locations)
•
Fasten [2] M10 Hex Screws to E-Rail Mount Nuts at top and bottom of Equipment Rail
•
Tighten M10 Hex Head Screw to 30.0 +/- 5.0 N-m [22.1 +/- 3.7 Ft-lbs]
INSTALL EQUIPMENT RAILS
M10 Hex Head Screw
(use 15mm socket wrench)
Equipment Rail
Mount Nut
M10 Hex Head Screw
(use 15mm socket wrench)
Slot of
Front-to-Back Beam
