Panduit FMT1J Installation Instructions Download Page 4

Page: 4 / 4

INSTALLATION INSTRUCTIONS

FS066

E-mail:

[email protected]

Phone:

866-405-6654

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp

www.panduit.com

Page 4 of 4

Slide cover forward and secure with M5
screw. Affix fiber caution label and fiber
laser beam warning label where they are
clearly visible.

Splice cables per manufacturers instructions.

Gently route excess fiber through the
splice tray following the bend radius
control staying under the guide tabs.

Wire retainers and cable ties are
provided to secure the cable within
the enclosure.

Guide Tab

Bend Radius Control

Splice Connection

Summary of Contents for FMT1J

Page 1: ...cable in use Follow TIA EIA 568 A 569 606 and 607 installation guidelines where applicable DANGER UNMATED CONNECTORS MAY EMIT INVISIBLE LASER RADIATION DO NOT LOOK DIRECTLY INTO THE END OF THE CONNEC...

Page 2: ...for cutting locations If you utilize cable entry through a grommet knockout location use pliers to grip the knockout and twist to remove To remove strain relief knockout strike the knockout disk with...

Page 3: ...Page 3 of 4 Enclosure mounts to rack with the M5 screws and flat washers M6 screws or 12 24 screws provided Insert cable through appropriate entry location Strip one meter of jacket from the end of th...

Page 4: ...4 Slide cover forward and secure with M5 screw Affix fiber caution label and fiber laser beam warning label where they are clearly visible Splice cables per manufacturers instructions Gently route ex...