INSTRUCTIONS FS149A
For Technical Support: www.panduit.com/resources/install_maintain.asp
Reconfiguring patch panel to accept 6-Port or 4-Port Modules
Figure 36
Figure 35
Figure 34
triangular cutout
To install rail onto tray, align rail between triangular cutouts
(shown in Figure 34). The posts on the bottom of the rail will
drop into the cutouts in the tray. As the rail is pushed toward the
back of the tray, the posts will engage the tray. Once the rail is
fully re-inserted the front of the rail will snap into position. Pull
forward on the rail to ensure it is properly installed.
While continuing to apply downward pressure on the rail being
installed, push the rail backward (shown in Figure 35). As the
rail begins to move it will engage with the tray.
The posts on the bottom of the rail will drop into the cutouts in
the tray. As the rail is pushed toward the back of the tray, the
posts will engage the tray. Apply pressure downward, (shown in
Figure 36) to make posts engage with tray. Once the rail is fully
inserted the front of the rail will snap into position.
Page 14 of 19
