INSTALLATION INSTRUCTIONS FS006
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 5 of 11
Route fiber through grommet to fiber
cassettes as shown. Leave enough
slack so that when the drawer is fully
extended, cables are not put under
tension. However, do not use so
much slack that drawer cannot be
returned to the home position. (See
Fig 7C)
Use
T
AK
-T
Y
Tape to secure fiber
cords at cable entry location and
other points as shown.
Drawer in extended position
Figure 7B
Figure 7C
Free Floating
T
AK
-T
Y
Tape
Adhesive
Bevel Entry
Clips. Note
location and
position of
clips.
Drawer in home position
Grommet
Fixed
T
AK
-T
Y
Tape
U
SE
T
AK
-T
Y
Tape
to fasten
cable to fence outer slots.
Cable length
between point “A”
and point “B” is
approx. 34"
[.864m].
“A”
“B”
