manualshive.com logo in svg

Panduit DPOE12U1X, User Manual

Share
Download
Panduit DPOE12U1X User Manual Download Page 22

PANDUIT

®

 DPoE

™ Power Patch Panel User’s Guide 

Issue 2.2 

 

 

Part Number: PN378A 

 

 

 

 

 

  

21

 

 

 

 
For security purposes, the network operator will then be given the opportunity to restrict the Element 
Manager to the 

administrator 

UserName only (default) or whether other users of this PC can access it.  

Once this selection is made, the installation process completes in only a few minutes. 
 

 

 
Remove the CD-ROM from the CD-ROM drive and store it in a safe place.   
 

NOTE:

 

The 

DPoE

™ Power Patch Panel Support Tools CD-ROM also includes the option 

to uninstall the 

PANDUIT

®

 Element Manager.   

 
 

NOTE:

 

Critical updates to the support programs may occasionally come from Microsoft 
Corporation.  The 

Windows Update

 option from the PC’s START Menu can be used 

to periodically check for such updates. 

 

Connecting the EM Host Computer to the 

DPoE

™ Power Patch Panel  

The computer that hosts the EM can either be directly connected to the 

DPoE

™ Power Patch Panel or 

connected through the Ethernet network.  If the PC is directly connected to the 

DPoE

™ Power Patch 

Summary of Contents for DPOE12U1X

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands