Page: 2 of 4
PUSH BACKWARD
FOR MANUAL
TENSION
PULL FORWARD
FOR CONTROLLED
TENSION
D
B
C
TROUBLESHOOTING
TO RELEASE AND REMOVE STRAP
FROM TOOL BEFORE CUTTING,
DISENGAGE BOTH KNOB AND LEVER.
MULTI-POSITION HANDLE
ALLOWS ACCESS TO TIGHT AREAS.
A
TOOL MAINTENANCE
TO INHIBIT CORROSION AND MAINTAIN PERFORMANCE OF THE TOOL, KEEP THE METAL SURFACES COATED
WITH A LIGHT OIL (WD-40® OR EQUIVALENT). After every 5,000 cuts (or when experiencing a significant increase in
cutting force), use a WD-40 aerosol to blow the dirt and debris off of the blade and blade housing area.
BT2HTI
© Panduit Corp. 2018
OPERATION INSTRUCTIONS
