Installation Guide
AT-VTP-1000VL-BL and AT-VTP-1000VL-WH
7
Glass Mounting
1
Connect the included mounting screws into the back of the wall plate. Do not over-tighten
the screws, as they should stick out a few mm from the wall plate for affixing to the wall/
glass mount.
2
Remove the paper from one side of the double-sided tape and affix it to the back of the
mounting plate.
3
Align the screws on the back of the wall plate with the four large holes and slide them onto
the mounting plate.
4
*Optional* Affix the Glass Mount Cover Sticker to
the glass where the unit will be placed.
5
Remove the cover from the back of the double-
sided tape.
6
Gently press the unit and mount firmly to the glass
and hold pressure for thirty seconds to ensure the
tape is fully engaged.
