AT-OME-MS52W
14
POWER
SHOW IP
DP
HDMI 3
HDMI 4
BYOD
USB-C
USB HOST
2
1
USB HUB
OUT 1
OUT 2
AT-OME-MS52W
USB
USB
USB
USB
USB
4
OUTPUT
LAN
DC 24V
3
2
INPUT
USB
AUDIO
WiFi
AUX
IN
RS-232
RX TX
RELAY
TRIGGER I/O
COM
C1
C2
P
OUT
L
R
RESET
IP MODE
MIRACAST
TM
1
2
1
Connection Instructions
Installation
1.
Connect up to two USB host computers to the
USB HOST
ports on the front panel.
2.
Connect two USB devices, such as a speakerphone, to the
USB HUB
ports on the front panel.
Cable
Max. Distance @ 4K
Max. Distance @ 1080p
CAT5e
295 feet (90 meters)
330 feet (100 meters)
CAT6a / CAT6a / CAT7
330 feet (100 meters)
330 feet (100 meters)
IMPORTANT:
Stranded or patch cable is not recommended due to performance issues.
Sheilded cables are strongly recommended to minimize signal noise and interference.
Core
Shielding
CAT5e
CAT6
CAT6a
CAT7
Solid
UTP (unshielded)
N/A
STP (shielded)
3.
Connect a USB-C cable from a source to the
USB-C (1)
port.
4.
Connect a DisplayPort cable from a source to the
DP IN (2)
port.
5.
Connect up to two UHD/HD sources, using HDMI cables, to the
HDMI IN (3)
and
HDMI IN (4)
ports.
6. Connect an HDMI cable from the
HDMI OUT
port to a UHD/HD display.
7.
Connect a category cable (CAT-5e or better), up to 330 feet (100 meters), from the
HDBaseT OUT
port to a
compatible receiver, such as the AT-OME-EX-RX.
8. Connect an Ethernet cable from the
LAN
port to the Local Area Network (LAN). Atlona recommends this step
and provides access to the built-in web server, which can be used to control and manage the AT-OME-MS52W.
POWER
SHOW IP
DP
HDMI 3
HDMI 4
BYOD
USB-C
USB HOST
2
1
USB HUB
OUT 1
OUT 2
AT-OME-MS52W
USB
USB
USB
USB
USB
4
OUTPUT
LAN
DC 24V
3
2
INPUT
USB
AUDIO
WiFi
AUX
IN
RS-232
RX TX
RELAY
TRIGGER I/O
COM
C1
C2
P
OUT
L
R
RESET
IP MODE
MIRACAST
TM
1
2
1
1
3
2
4
5
6
7
8
