Panduit Atlona Omega AT-OME-EX-TX Installation Manual Download Page 1

1

Installation Guide

AT-OME-EX-TX

Omega

 4K/UHD 

HDMI Over HDBaseT Transmitter with USB, Control, and PoE

AT-OME-EX-TX

The Atlona 

AT-OME-EX-TX

 is an HDBaseT transmitter for video up to 4K/60 4:2:0, plus 

embedded audio, control, Ethernet, and USB over distances up to 330 feet (100 meters). 

Part of the Omega™ Series of integration products for modern AV communications and 

collaboration, the OME-EX-TX is HDCP 2.2 compliant and transmits IR, RS-232, and IP control 

signals.With a matching HDBaseT receiver, the integrated USB extension is ideal for software 

video conferencing and the use of touch or interactive displays. The OME-EX-TX includes a USB 

host for a PC, plus two peripheral devices such as a speakerphone, microphone, or keyboard 

and mouse. This transmitter is ideal for use with Omega Series receivers as well as switchers 

with HDBaseT inputs.  Also available is the OME-EX-KIT which includes the OME-EX-TX and 

OME-EX-RX.*

* The AT-OME-EX-TX is not compatible with the AT-UHD-HDVS-300 system for extending USB.

IMPORTANT

: Visit http://www.atlona.com/product/AT-OME-EX-TX for the 

latest firmware updates and User Manual.

1 x AT-OME-EX-TX

1 x Captive screw connectors, 4-pin

2 x Mounting plates

2 x Mounting screws

1 x Installation Guide

Package Contents

Summary of Contents for Atlona Omega AT-OME-EX-TX













Reviews: