Panduit ATLONA Captivate AT-CAP-FC110, Manual

Page: 21 / 24

AT-CAP-FC110 21
IR Operation
Device Operation
Setting the IR Channel
Once the desired IR channel is set on the AT-CAP-FC110, the corresponding IR channel must also be assigned to the
included IR remote. The following instructions outline this procedure.
1. Press and release the button on the included IR Remote Control.
2. Select the submenu and press the button.
3. Options for the SYSTEM submenu will be displayed.
1 2 3
F2 F1
FOCUS
A
1 2 3
F2 F1
FOCUS
A
SYSTEM
IR ADDRESS
LANGUAGE
ENGLISH
1
OFF
OFF
3X
OFF
HIGH
5
PRESET 1
0
MIRROR
FLIP
DZOOMLIMIT
EXPERT MODE
DETECTION SENS.
FRAMING MOVE SENS.
TARGET LOST ACT.
AUDIO DELAY
SYSTEM
OFF
ENGLISH
OFF
3X
OFF
HIGH
5
PRESET 1
0
MIRROR
LANGUAGE
FLIP
DZOOMLIMIT
EXPERT MODE
DETECTION SENS.
FRAMING MOVE SENS.
TARGET LOST ACT.
AUDIO DELAY
IR ADDRESS 2
4. Select the IR ADDRESS option and press the or button to set the IR address. In this example, the IR
ADDRESS is set to 2 .
1 2 3
F2 F1
FOCUS
A
1 2 3
F2 F1
FOCUS
A
1 2 3
F2 F1
FOCUS
A
IMAGE
DEVICE INFO
COLORTONE SYSTEM
DEFAULTS
5. Press the button to commit changes. NOTE: The AT-CAP-
FC110 will be unable to receive any further commands from the IR
remote until the IR channel is changed on the IR remote.
6. Press and hold the F1 key for five seconds, then release it. The LED
indicator on the IR remote will be solid red.
7. Press the 1, 2, or 3 button to select the corresponding IR address.
In this example, since the AT-CAP-FC110 was assigned the IR
address of 2, button 2 would need to be pressed on the IR remote
control.
8. The LED indicator on the IR remote will blink once and then turn off.
9. The IR channel has been successfully changed.
10. Press and release the button to exit the menu system.
1 2 3
F2 F1
FOCUS
A
1 2 3
F2 F1
FOCUS
A
LED indicator
IR channel buttons