Installation Guide
AT-VSP-800-BL and AT-VSP-800-WH
2
Mounting Instructions
24
V
D
C / 0
.5
A
L
A
N / P
o
E
802
.3a
f c
omplian
t
D
e
signe
d i
n t
h
e U
S
A
M
anu
fac
ture
d i
n T
aiwa
n
The AT-VSP-800 can be mounted to a 1 gang back plate.
1
Select the type of 1 gang back box to use and install into a wall.
NOTE:
Install using the region’s safety guidelines for electrical boxes.
2
Thread the Ethernet cable through the 1 gang box.
3
Install the included mounting plate into the 1 gang box.
a
If using a UK back box, place the screws in the two inside mounting holes.
b
If using a US back box, place the screws through the outside screw holes.
c
If using a EU back box, place the screws through the inside screw holes.
4
Loosen or remove the two screws located at the top and bottom of the unit.
5
Place the unit onto the metal back plate, the dual prongs inserting into the small opening on
the back of the unit.
6
Tighten/attach the screws at the top and bottom of the touch pad.
NOTE:
To avoid damage to the unit, do not overtighten the screws.
UK back box:
