AT-UHD-CLSO-840
35
Basic Operation
Creating and Editing Routing Presets
1.
Login to the web GUI. Refer to
Introduction to the Web GUI (page 55)
for more information.
2. Click
Route Memory
, under the
Configuration
section, in the menu bar on the left side of the screen.
3.
Create the desired routing state(s). Video and audio routing is similar to the
I/O
screen. Refer to
more information.
4. Click the
Preset select
drop-down list and select the desired memory preset location. In this example below,
Preset_2
will be used to store the current routing state.
5. Click the
Save
button to commit changes.
Creating a Routing Preset
Using presets provides a quick and efficient way of switching between multiple routing configurations. The AT-UHD-
CLSO-840 provides five memory locations that can be used to store each preset. The following section covers
creating, editing, and using routing presents.