AT-UHD-CLSO-601
21
WebGUI
Select Settings from the top navigation to adjust routing and video settings.
Settings
Output Resolution
Switch between multiple video output resolutions:
Pass through - Input video will pass to the display without being scaled
Native - Upscales/downscales the output signal to match the HDBaseT display’s preferred resolution
HD - Will upscale/downscale the output signal to match the selected HD resolution
PC - Will upscale/downscale the output signal to match the selected PC resolution
Note:
When the output is set to UHD resolutions, UHD sources are passed through without scaling. Frame rates
are not changed. (e.g. if 3840x2160@30Hz input is received, output will remain 30Hz even if output is set to 24Hz)
System Settings
Power - Turn the switcher on and off
Panel Lock - Locks/unlocks the front panel buttons, or just the menu when Lock Menu is selected
Auto Switch - Turns auto switching between HDMI inputs on/off
VGA auto switch - Turns VGA auto switching on/off
Note: VGA auto switching is only available on VGA and will not work with component, composite, and S-Video
*Component, composite, and S-Video poll settings will grey out when VGA auto switching is on*
Input Status Detection - When enabled (ON), the poll settings will display the type of input signal being received on
the VGA port.
Source
Select the input to be routed to the output.
