3
Installation Guide
AT-RON-444
1. Connect an HDMI cable from the UHD/HD source to the
HDMI IN
port on the AT-RON-444.
2. Connect display/sink devices to the AT-RON-444 to the
HDMI OUT
ports.
3. Connect the included power supply to the
DC 5V
Phoenix connector.
Installation
Power Connector
Locate the included orange Phoenix terminal block, and wire the included power supply to the
block as shown below. Do not use high-torque devices, when securing the wires, as this may
damage the screws and/or connector block.
Black
White
5V DC
power supply
RONDO
POWER SYNC
INT
1
2
3
4
LEARN
EDID
TM
FW
HDMI OUT
HDMI IN
4
3
2
1
DC 5V
+
AT-RON-444
1
3
2
