AT-JUNO-451
17
HDCP Settings
Normally, if a source is transmitting HDCP content to a display that is not HDCP-compatible, then the resulting image
on the display will result in “snow”, image flickering, or no picture.
For example, in the illustration below, a laptop source is connected to the AT-JUNO-451. A non-compliant display is
connected to the AT-JUNO-451 using an HDMI cable.
By default, the laptop may transmit HDCP content. However, when connected to a display that does not support
HDCP, the laptop must be instructed to send non-HDCP content, in order for the content to be displayed.
1. Open the desired web browser and enter the IP address of the AT-JUNO-451.
2.
Log in as the
admin
user with the required credentials. The factory-default username and password for the
admin user are listed below:
Username: root
Password: Atlona
3. Click
A/V Settings
in the menu bar.
4. Click the
Input 1
toggle switch, under HDCP Settings, and set it to the
OFF
position. This will instruct the source
device to send non-HDCP content, if possible.
HDMI
AT-JUNO-451
HDMI
Non-Compliant Display
Laptop
POWER
JUNO
X
1
2
3
4
INPUT
INPUT
FW
TM
NOTE:
Not all source devices are capable of transmitting non-HDCP content. For example, Sony
PlayStation® gaming consoles and Mac® computers always transmit HDCP-encrypted content.
Basic Operation
