AT-HDVS-150-TX / AT-HDVS-150-TX-PSK
22
The following procedure is used for both the AT-HDVS-150-TX and the AT-HDVS-150-TX-PSK. The firmware file for
the AT-HDVS-150-TX is used for both models.
Requirements
• AT-HDVS-150-TX or AT-HDVS-150-TX-PSK
•
Firmware file:
AT-HDVS-150-TX_[version].bin
•
USB Type A to Mini-USB Type B cable
•
Computer with USB port
1.
Download the latest firmware from the Atlona web site.
2. Disconnect the power to the AT-HDVS-150-TX by disconnecting the Ethernet cable from the
HDBaseT OUT
port
on the AT-HDVS-150-TX.
3. Press and hold the
DISPLAY ON/OFF
button.
4. While pressing the
DISPLAY ON/OFF
button, connect the USB cable from the computer to the
FW
port on the
AT-HDVS-150-TX. When the USB cable is connected, the
PWR
LED indicator will glow solid green.
5.
After a few seconds, a folder with the name USB UPDATER, will be displayed. Release the
DISPLAY ON/OFF
button.
Appendix
FW port
Updating the
Firmware
