Rooms are
Off.
When powering back On, the driver will insert a 20-second delay before sending a
switching command
.
On Room O
ff
allows you to specify if the driver performs a special opera
�
on when a room is turned
Off. O
ther than ‘Do nothing’, you may select ‘Disable HDMI Output’
.
NOTE: Disabling the HDMI
output could cause EDID issues with some displays
.
----------------------------------
USAGE NOTES
•
Use the programming command 'Set to Speci
fi
c Input' to change HDMI input and the command
‘Turn Output On or O
ff’
to enable or disable a speci
fi
c HDMI output
.
•
The programming command ‘Set Mute’ relates only to the de-embedded Analog Audio
Outputs
.
•
The programming commands ‘Power On’, ‘Power
Off’
, ‘Lock Panel’ and ‘Unlock Panel’ are self-
explanator
y.
•
The programming command ‘Trigger CEC’ allows you to send a supported CEC command to a
speci
fi
c HDMI output
.
•
The programming command ‘Recall Saved IO Memory’ recalls savec I/O route se
�
ngs for the
chosen preset number
.
•
The programming command ‘Set Input EDID’ sets the EDID of an input to default, internal, or a
previously saved
EDID.
•
The H2H Matrix Switch is intended to feed audio to an ampli
fi
er or a receiver
.
You may
experience switching issues if you feed the Audio outputs to another audio matrix switch
.
----------------------------------
SUPPORT
For support on this driver please go to h
�
p://w
ww.a
tlona
.
com/product-support
/. If
required, give a
detailed descrip
�
on of the problem and also include the version number of the driver and the version of
Control4 OS that you are using
.
----------------------------------
CHANGELOG
V1 July 1, 2018
Ini
�
al Release
2
.0.
0 April 24, 2019
Enhanced IP/Serial capabili
�
es, added commands
-------------------------------------------------------------------------------------------
Developed by Domosapiens Inc
.
for Atlona In
c.
Copyright 2019, Domosapiens In
c.
All Rights Reserved
2
AT-HDR-H2H-44MA
AT-HDR-H2H-88MA
Control4 driver
