AT-ANC-108D
20
Message Polling tab
Active
Click this toggle switch to ENABLE or DISABLE status
polling for the device.
Name
Displays the descriptive name of the device.
Repeat Interval
Displays the repeat interval in seconds. For example,
if this field displays “5”, then polling will occur every 5
seconds.
Device
The name of the physical device.
Status Command to send
Displays the name of he actual API call.
Feedback to Compare
Displays the device’s broadcast response. For example,
on an AT-HD-SC-500, if the ‘Mute Status’ is sent to the
device, then the device response would be either
VOUT-
Mute1 on
or
VOUTMute1 off
.
If True Execute this macro
Displays the macro that will be executed, depending on
the Feedback to Compare column. For example, if the
Feedback to Compare
value is
VOUTMute1 on
, then
the
Mute On
macro is executed.
Edit
Click the
Add
button to add a new polling configuration.
Click the Edit button (not shown) to modify an existing
polling configuration. The
Add
button is only displayed
on empty rows. Once a new polling configuration is
added, the
Add
button for that row will change to an
Edit
button.
Remove
Click the
DEL
button to delete a polling configuration
from the list.
Configuration and Management Interfaces
This tab allows the AT-ANC-108D to send a command, which behaves as a status call, to each of the connected
devices.
