Figur 36.
Figur 37.
38.
25/36
USER AND MAINTENANCE MANUAL I ENG_OMM_CD100_P07 I 2022-10-19
@Pandrol 2022
7.4.
Change Of Arms On The De-Clipping Tool
For some applications, different types of arms are used. Before start of operation, check
that the the arms are correctly adjusted The arm length can be adjusted in three steps to
accomodate correct for different rail heights.
7.5. Adjustments Of Claws
The claws are adjustable in three different positions.
1. Loosen the screws on the lower part of the claws. Those screws are indicated by yellow
washers.
2. Set the claws in desired position.
3. Tighten the screws.
PLEASE NOTE: This must be done on both sides of the tool.
Fig 38.
Fig 39.
Fig 40.
Ì
WARNING!
Risk for clamping. All adjustments work, overhaul and service must take place
with the engine switched off, cooled and with working tools disengaged.
