background image

 

 

 

 

Designers, Manufacturers and Suppliers of Quality Height Safety & Rescue Equipment, Training & Consultancy 

 

EC DECLARATION OF CONFORMITY 

The Manufacturer in the Community 

P&P Safety Limited, 131 New John Street, Aston, Birmingham 

B6 4LD United Kingdom 

 

Declares that the PPE described hereafter as the 

P&P MK1 Range of Harnesses 

 

is in conformity with the provisions of Council Directive 89/686/EEC and where such is the case, with the national standard  

transposing harmonizing standard numbers: BSEN 361:2002 or BSEN 358:2000 

is identical to the PPE which is subject to EC certificate of conformity number 8097 Issue 2 dated 23 October 2015, issued by;  

SATRA Technology Centre Ltd, Wyndham Way, Telford Way Industrial Estate,  

Kettering, Northamptonshire NN16 8SD  

EC Notified Body No 0321 

 

 

Declares that the PPE described hereafter as the 

P&P FRS MK2, SUPER MK2 & MK3 Range of Harnesses 

is in conformity with the provisions of Council Directive 89/686/EEC and where such is the case, with the national standard 

 transposing harmonizing standard numbers: BSEN 361:2002 or BSEN 358:2000 

is identical to the PPE which is subject to EC certificate of conformity numbers: 

7286 Issue 2 dated 14 May 2015, 6642 Issue 3 dated 14 May 2015, 5891 Issue 2 dated 13 July 2012, issued by; 

SATRA Technology Centre Ltd, Wyndham Way, Telford Way Industrial Estate,  

Kettering, Northamptonshire NN16 8SD  

EC Notified Body No 0321 

 

is subject to the procedures set out in Article 11 point B of Directive 89/686/EEC 

under the supervision of the approved body: 

The British Standards Institute, 389 Chiswick High Road, London 

W4 4AL, United Kingdom 

EC Notified Body No 0086 

 

 
 

 

Done at Birmingham, United Kingdom on 12 January 2016 

 
 
 

 

 

 

 

 

 

 

 

 

 

Senior Technical Manager 

P&P Safety Limited, 131 New John Street, Aston, 

Birmingham B6 4LD, England. 

Telephone: 0121 359 4561 Facsimile: 0121 359 4136 

 Email: [email protected] 

Website: www.ppsafety.co.uk 

 

This Manual and its contents © P&P Safety Limited 2016  

P&P MK1, MK2 & MK3 Range of Fall Arrest Harnesses Manual V 5 0116  

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any 

means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of P&P Safety Limited. 

 

                    P&P Safety Limited, 131 New John Street, Aston, Birmingham B6 4LD, England. 

            Tel: +44 (0)121 359 4561 Facsimile: +44 (0)121 359 4136 e-mail: [email protected] website: www.ppsafety.co.uk 

Registered in England No. 01493537 

 

 

Summary of Contents for MK3










Reviews: